INTU STRIP F
INTU FR EJ SEAL
March 16, 2018
INTU STRIP FC
March 16, 2018
INTU STRIP F
The firestop seal INTU STRIP F is made of graphite-based material. The material swells under the influence of high temperature, increasing its volume 35 times. The expanding product prevents the spread of fire through joints and gaps in the fire door. Fire resistance class up to EI 60.
INTU STRIP F TDS EN
Where to use
The INTU STRIP F is designed for sealing gaps in fire doors.
Compliance
Compilance:
- Tested to EN1364-1:2014-03 + Ap1:2016 10P
- Door fire test report LZP43-02580/16/Z00NZP
- Swell pressure report LZP08-2580/16/Z00NZP
- Swell height report LZP09-2580/16/Z00NZP
- Thermal conductivity test report LZF00-03116/20/Z00NZF
- TDS
- SDS
Availability
- rolls with a length of 10/20/50/100/200 m
- thickness from 2.0 mm
- width from 10 to 58 mm
Installation
The seal is installed around the door in previously prepared grooves. In order to install the seal, use your own gluing technology; fit it exactly to the milled groove along its entire length. Seals should not be cut after applying to surface.
Transport & storage
It is recommended to store in dry internal conditions at temperatures between + 5°C and + 25°C.
INTU STRIP F SDS