INTU FR EJ SEAL
INTU FR GRILLE
March 16, 2018
INTU STRIP F/FC
March 16, 2018
INTU FR EJ SEAL
The flexible gap filler INTU FR EJ SEAL is composed non-flammable foams of different thicknesses, with layers of graphite-based intumescent material. During fire, the material increases its volume and forms firestop foam filling the gap. The system is very flexible, making it ideal for gaps with a high degree of displacement.
- Fire resistance class up to EI 120
- Installation in walls and floors
- Easy installation without the use of special tools
- High flexibility
- Resistance to difficult weather conditions
INTU FR EJ SEAL TDS EN
Where to use
Fire retardant sealing of gaps and fire rated expansion joints in walls and floors with fire resistance class EI 120 up to 50mm gap width.
Rigid walls:
The wall must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 600kg/m3
Rigid floors:
The floor must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 1700kg/m3
Compliance
Compilance:
- European Technical Assessment:
ETA 20/0330 of 26/05/2020 - Declaration of Performance:
DoP 10/2019 - Certificate of Constancy of Performance:
1488-CPR-0865/W
Availability
Installation
- The surface of the joint must be clean, dry and free of dust before installation.
- Choose the right size of the filler depending on the width of the gap.
- Compress the INTU FR EJ SEAL flexible filler and insert it into the gap so that the intumescent material adheres to the partition.
- Fill the remaining gap with mineral wool with a density of min. 50 kg/m3.
- INTU FR EJ SEAL should be placed on either side of a wall or a floor, flush with the partition.
Transport & storage
It is recommended to store in dry internal conditions at temperatures between + 5°C and + 35°C.