INTU STRIP F/FC
INTU STRIP F
March 16, 2018
INTU FR BOARD A
March 19, 2018
INTU STRIP F/FC
The firestop intumescent seal INTU STRIP F and INTU STRIP FC (intumescent seal with a self-adhesive layer) is made of a graphite-based material. Under the influence of high temperature, the material swells, increasing its volume. The expanding product prevents the spread of fire through joints and gaps in fire doors.
INTU STRIP F/FC EXPANSION REPORT EN
INTU STRIP F/FC PRESSURE REPORT EN
Where to use
The INTU STRIP FC is designed for sealing gaps in fire doors.
Compliance
Compilance:
- Door fire test report:
LZP43-02580/16/Z00NZP - Swelling pressure report:
LZP48-2580/16/Z00NZP - Swelling height report:
LZP09-2580/16/Z00NZP - Thermal conductivity coefficient test report:
LZF00-03116/20/Z00NZF
Availability
- rolls with a length of 50/100 /200 m
- thickness from 2.0 mm
- width from 15 to 58 mm
Installation
1) Dust the gluing surface and then degrease with IPA (isopropyl alcohol / isopropanol min. 90%)
2) Install the seal around the door in previously prepared millings.
INTU STRIP F: Using your own gluing technology, precisely fit the seal in the milling place along its entire length.
INTU STRIP FC: Remove the protective layer from the adhesive tape, align the seal and press it thoroughly in previously prepared millings along its entire length.
The seal should not be cut after gluing to the substrate.
Transport & storage
Store in dry and cool conditions, at a temperature between +5°C to +35°C.