INTU FR BRICK
INTU FR BOARD A
March 19, 2018
INTU FR COAT A
March 19, 2018
INTU FR BRICK
Fire protection block INTU FR BRICK is made of intumescent polyurethane foam with halogen-free fire safety additives. Intumescent foam close the hole during fire, preventing the spread of fire and smoke.
- fire resistance class up to EI 120
- mixed penetration seal
- to medium-sized and large fire protection penetration seals
- penetration seals with frequently changing pass-through installations
- for use in walls and floors
INTU FR BRICK DECLARATION OF PERFORMANCE EN
Where to use
The INTU FR BRICK intumescent fire stop brick is intended to be used as mixed penetration seal to temporarily or permanently reinstate the fire resistance performance of flexible wall, rigid wall and rigid floor construction where they have been provided, with apertures which are penetrated by various cables, waveguides, conduits / tubes, metal pipes, plastic pipes and cable support constructions (perforated or non-perforated steel cable trays and steel ladders).
Flexible walls:
The wall must be minimum thickness 94 mm. Must have steel or timbers profile structure covered on both sides with minimum 2 layers of boards with minimum thickness 12,5 mm or minimum one layer of boards (minimum thickness 25 mm) with classification.
Rigid walls:
The wall must be 100 mm minimum thickness. Must have concrete, aerated concrete, cellular concrete, reinforced concrete or masonry structure, with min. density ρ ≥ 450 kg/m3.
Rigid floors:
The floor must be 150 mm minimum thickness. Must have concrete, aerated concrete, cellular concrete, reinforced concrete or masonry structure, with min. density ρ ≥ 450 kg/m3.
Compliance
Compilance:
- Test standard:
EN 1366-3 / EAD 350454-00-1104 - European Technical Assessment:
ETA-10/0431 and ETA-11/0206 - Declaration of Performance:
DoP ZZ230-20180701 - Certificate of Constancy of Performance:
0761-CPR-0187
Availability
Installation
Transport & storage
Store in dry and cool conditions at temperatures between + 5°C and + 25°C.