INTU FR COAT I

Where to use

INTU FR COAT I is intended for the protection of non-flammable pipes in fire partition floors and walls and electric cables / cable trays in wall.

Flexible walls:

The wall must be at least 125mm thick and have a steel profile structure covered on both sides with a minimum of 2 layers of boards with a thickness of 12.5mm.

Rigid walls:

The wall must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 600kg/m³

Rigid floors:

The floor must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 1700kg/m³

Compliance

Compilance:

• Reference standard: EN 1366-3 / ETAG 026-2 / EAD 350454-00-1104
• DoP 5/2019
• ETA 19/0038
• CoC 1488-CPR-0756/W
• TDS
• SDS

Availability

Installation

1. Prior to sealing, clean the surfaces of the hole and system components from grease and other contaminants thoroughly.
2. Mix the paint well before use. The paint does not require thinning but you can add a water.
3. The space around the pipe should be filled with cement mortar or mineral wool, the space around cable/cable trays should be filled mineral board INTU FR BOARD A (or mineral wool board density INTU FR COAT A) flush with the face of the partition.
4. Cover the pipe with INTU FR COAT I with a layer of appropriate thickness and length according to Table 1.
5. Cover the hole filling (mineral wool/cement mortar) with INTU FR COAT A ablative paint, overlapping the surface of the partition according to Table 1.

Approximate consumption of INTU FR COAT I – 1,5 kg/m² – for a dry film thickness of 1 mm.

Transport & storage

Store in dry and cool conditions at temperatures between + 5°C and + 25°C.

Shelf life 12 months from the production date shown on the packaging.

INTU FR COAT I SDS