INTU FR COAT A (LINEAR JOINT SEALS)
INTU FR MORTAR
February 26, 2025
INTU FR BOARD A (LINEAR JOINT SEALS)
May 2, 2025
INTU FR COAT A (LINEAR JOINT SEALS)
The firestop ablative paint INTU FR COAT A is a one-component product designed for sealing fire protection penetrations and expansion joints with fire resistance class up to EI 240. Under fire conditions and the influence of high temperature, endothermic reactions take place in the product. The paint absorbs heat to a large extent, delaying the impact of fire on structural
elements.
Product has BREEAM Attestation.
INTU FR COAT A- ATTESTATION BREEAM
Where to use
The fire rated ablative coat INTU FR COAT A is designed for fire protection of: penetration seals with single or group of non-flammable pipes in floors or walls, expansion joints in floors or walls, electric cables in walls (combined with paint INTU FR COAT I).
Flexible wall:
The wall must be minimum thickness 125 mm. Must have a steel profile structure covered on both sides with minimum 2 layers of boards with minimum thickness 12,5 mm.
Rigid walls:
The wall must be minimum thickness 150 mm. Must have concrete, cellular concrete or masonry structure, with minimum density 600 kg/m3.
Rigid floors:
The floor must be minimum thickness 150 mm. Must have concrete, cellular concrete or masonry structure, with minimum density 1700 kg/m3
Compliance
Compilance:
- European Technical Assessment:
Penetration seals: ETA 19/0038 of 28/06/2019
Linear joints: ETA 19/0037 of 28/06/2019 - Declaration of Performance:
Penetration seals: DoP 5/2019
Linear joints: DoP 7/2024 - Certificate of Constancy of Performance
Penetration seals: 1488-CPR-0756/W
Linear joints: 1488-CPR-0763/W
Availability
Installation
1) Clean the surface of the hole and system components from grease and other contaminants thoroughly.
2) Mix the paint thoroughly before use. The paint does not require dilution, but if necessary, water can be added.
3) Cut the mineral wool board to the correct size and place the wool board in the hole/gap, next use INTU FR COAT A to paint mineral wool board.
4) Fill all gaps between services – mineral board or partition – mineral board with INTU FR MASTIC.
5) Use INTU FR COAT A ablative paint to make an overlap on the partition and on the mineral wool lamella placed on the metal pipe.
Approximate consumption of INTU FR COAT A: ~1,6 ÷1,7 kg/m2 – for a dry film thickness of 1,0 mm.
Approximate dying time: ~60 min (dry to the touch), ~360 min (complete dry).
Transport & storage
Store in dry and cool conditions at temperatures between + 5°C and + 35°C.
Shelf life 12 months from the production date shown on the packaging.