INTU FR INSLEEVE
INTU FR COLLAR L
March 16, 2018
INTU FR EJ SEAL
March 16, 2018
Show all
INTU_FR_SLEEVE_1_500

INTU FR INSLEEVE

Internal sleeve INTU FR INSLEEVE is composed of a flexible insert made of graphite-based material that swells under the influence of temperature above 140°C and a metal ring-shaped cartridge made of 1.0 mm thick sheet metal protected with anti-corrosion coating.

 

 INTU FR INSLEEVE TDS EN

Content in accordance with TDS EW_1.12

Category:

Where to use

INTU FR INSLEEVE is used for fire protection of penetrations with plastic pipes (PVC, PP, PE, HDPE) running through fire partitions. For installation inside the pipe.

 

Rigid walls:

The wall must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 600kg/m3

 

Rigid floors:

The floor must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 1700kg/m3

Compliance

Compilance:

  • Reference standard: EN 1366-3 /ETAG 026-2 / EAD 350454-00-1104
  • DoP 4/2019
  • ETA under development
  • CoC under development
  • TDS
  • SDS
  • Fire classification 03777/18/Z00NZP

 

Availability

Installation

  1. Adjust the size of the sleeve to the pipeline diameter.
  2. Slide the sleeve into the pipeline.
  3. Fill holes and material losses around the pipe with cement mortar.

 

Transport & storage

INTU FR INSLEEVE has no negative impact on the environment. In the case of long-term storage, it is recommended to keep it in enclosed spaces. The storage period does not affect the product’s properties.

 

 INTU FR INSLEEVE SDS

This site uses cookies. More information.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close