INTU FR GUARD
INTU FR COAT I
March 19, 2018
INTU FR GRILLE DS/DP
August 21, 2018
Show all
INTU_FR_GUARD_grafika_2_500pix

INTU FR GUARD

The impregnate INTU FR GUARD is intended for fire protection of fabrics, decorations and clothing not exposed to wetting. The product gives cotton, wool, polyester, polyamide and decorative mosses a non-flammability feature.

INTU FR GUARD  has the form of a white-gray powder granulate. The impregnate is used in the form of an aqueous solution. It contains phosphorus and ammonium compounds and surfactants that help wetting impregnated fabrics.

INTU FR GUARD TDS EN

Content in accordance with TDS PW_1.12

Category:

Where to use

  • Schools, kindergartens,
  • Public administraction buildings,
  • Residential buildings, companies,
  • Theaters, cinemas, hotels,
  • Congress centers,
  • Shopping centers
  • Other objects

Compliance

Compilance:

  • DoP 14/2019
  • Fire classification: 01928/18/Z00NZP
  • Fire classification: 02957/19/Z00NZP
  • TDS
  • SDS

Availability

Installation

Preparation for impregnation

INTU FR GUARD LIQUID  – is a ready to use preparation containing phosphorus and ammonium compounds and surfactants that help wetting impregnated fabrics. The works should be carried out in the temperature range 15-30°C.

INTU FR GUARD GRANULATE – the product should be poured gradually into heated water up to approx. 50°C in the proportion of 1kg of impregnate to 4 liters of water – stirring constantly, until the granules dissolve completely. The solution should be prepared a few hours before use.

 

Impregnation

  • Method of bath –  the  expanded fabric should be immersed in impregnation for a period of 5 minutes. After removal, the fabric dried. You can not impregnate materials rolled into bales.
  • Spray or lubrication method – fabrics that can not be soaked (carpers, pavements, decorative mosses) are impregnated by spraying or lubricating the fabric for complete hydration.

 

Drying fabrics after impregnation

Impregnated fabrics should be dried at room temperature. The process can be accelerated by raising the temperature to max 50° C.

 

Cleaning fabrics after impregnation:

After washing or soaking the fabric should be impregnated again because the impregnation is washable.

 

YIELD

Standards of wear:  the amount of impregnation used per unit of fabric Surface depends on the finish and absorbency

of the material.

Approximate consumption of impregnate: 1L for 5-10m2

Transport & storage

Store in dry and cool conditions at temperatures between + 5°C and + 25°C.

 

INTU FR GUARD SDS

This site uses cookies. More information.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close