INTU FR COAT I
INTU ATP
March 19, 2018
INTU FR GUARD
August 21, 2018
Show all
INTU_FR_COAT_I_BLACK_500_CE

INTU FR COAT I

INTU FR COAT I is a one-component intumescent paint designed for sealing fire protection penetrations with non-flammable pipes. The coating made with this paint swells under the influence of temperature, creating a protective layer on the protected surface.
The paint protects the system elements in penetrations up to fire resistance class of EI 240.

 

INTU FR COAT I TDS EN

Content in accordance with TDS PK_1.23

Where to use

INTU FR COAT I is intended for the protection of non-flammable pipes in fire partition floors and walls and electric cables / cable trays in wall.

 

Flexible walls:

The wall must be at least 125mm thick and have a steel profile structure covered on both sides with a minimum of 2 layers of boards with a thickness of 12.5mm.

 

Rigid walls:

The wall must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 600kg/m3

 

Rigid floors:

The floor must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 1700kg/m3

 

Compliance

Compilance:

  • Reference standard: EN 1366-3 / ETAG 026-2 / EAD 350454-00-1104
  • DoP 5/2019
  • ETA 19/0038
  • CoC 1488-CPR-0756/W
  • TDS
  • SDS

Availability

Installation

  1. Prior to sealing, clean the surfaces of the hole and system components from grease and other contaminants thoroughly.
  2. Mix the paint well before use. The paint does not require thinning but you can add a water.
  3. The space around the pipe should be filled with cement mortar or mineral wool, the space around cable/cable trays should be filled mineral board INTU FR BOARD A (or mineral wool board density INTU FR COAT A) flush with the face of the partition.
  4. Cover the pipe with INTU FR COAT I with a layer of appropriate thickness and length according to Table 1.
  5. Cover the hole filling (mineral wool/cement mortar) with INTU FR COAT A ablative paint, overlapping the surface of the partition according to Table 1.

 

Transport & storage

Store in dry and cool conditions at temperatures between + 5°C and + 25°C.

Shelf life as specified on the product label.

 

INTU FR COAT I SDS 

This site uses cookies. More information.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close