INTU FR WRAP
INTU FR WRAP L
March 27, 2017
Show all
INTU_FR_WRAP_2_500
INTU_FR_WRAP_2_500
INTU_FR_WRAP_1_500

INTU FR WRAP

Firestop wrap INTU FR WRAP is made of graphite-based material.  The material swells under the influence of high temperature (about 140°C), and fills the entire space created after burned flammable installations.

 INTU FR WRAP ETA EN

 INTU FR WRAP TDS EN

Content in accordance with TDS EW_1.17

Category:

Where to use

INTU FR WRAPS are used for fire protection of penetrations with plastic pipes (PVC, PP, PE, HDPE, PEX/Al/PEX, PE-RT/Al/PE-RT, PP-R/Al/PP-R, PP-R GLASS) running through fire partitions.

 

  • protection of flammable pipes
  • fire resistance up to 240 minutes
  • availability: from 32mm to 200mm
  • high swelling ratio
  • ideal for installation in very tight spaces

 

Rigid walls:

The wall must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 600kg/m3

 

Rigid floors:

The floor must be at least 150mm thick and have concrete, cellular concrete structure or masonry structure, with a minimum density of 1700kg/m3

 

Flexible walls:

The wall must be at least 125mm thick and have a steel profile structure covered on both sides with a minimum of 2 layers of boards with a thickness of 12.5mm.

Compliance

Compilance:

  • Reference standard:
    EN 1366-3 / ETAG 026-2 / EAD 350454-00-1104
  • ETA-18/0593
  • DoP 1/2019
  • CoC 1488-CPR-0722/W
  • TDS
  • SDS

 

Availability

Installation

 

Transport & storage

It is recommended to store in dry internal conditions at temperatures between + 5°C and + 35°C

 

 INTU FR WRAP SDS

This site uses cookies. More information.

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close